2000 Piece/Pieces per Week within 5 days after confirm order
Packaging & Delivery
3~5days after order confirm
1Up to 1.25Gb/s bi-directional data links
2Hot-pluggable SFP footprint
3TX Disable and RX Los/without Los function
1000BASE-T and 10/100/1000BASE-T Copper SFP Transceiver
The host-side of OFSS-T1100 conforms to the mechanical specifications outlined in the SFP MSA1. The front portion of the SFP (part extending beyond the face plate of the host) is larger to accommodate the RJ-45 connector.
Copper Small Form Pluggable (SFP)transceivers is high performance,cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp- orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.
Up to 1.25Gb/s bi-directional data links Hot-pluggable SFP footprint TX Disable and RX Los/without Los function Extended case temperature range (0°C to +70°C ) Fully metallic enclosure for low EMI Low power dissipation (1.05 W typical) Compact RJ-45 connector assembly Access to physical layer IC via 2-wire serial bus 1000 BASE-T operation in host systems with SERDES interface 10/100/1000Mbps compliant in host systems with SGMII interface